BBV BBV RX100 Guía de instalación descargar pdf (Pagina 3)

Domes 23 April 2002 I.James

Version 1.3 Page 3 of 29 E & OE

Ultrak Diamond KD6 Dome Direct by RS485

The Ultrak dome needs to be set to Maxpro Emulation.

See Table 1. For correct switch settings.

You have full access to the dome menu and functions by the DS/DSL. The only function that is

not possible to use is the privacy zones and iris open/close of the camera (Not in menu option).

Also Preset (Preshot) names aren't available.

Dome features via DS/DSL:

Variable speed Pan/Tilt.

Zoom/Focus, Autofocus, Auto exposure, Backlight compensation.

460TVL 1.7 lux (0.15 with slow shutter).

72x zoom 4.1-73.8mm (18:1) optical zoom.

4x digital zoom.

400 deg/sec pan 200 deg/sec tilt.

80 Presets/Preshots (Preset 00 to Preset 79).

3 PTZ Tours (1 - 3) Has the ability to store manual PTZ movement.

4 Patrols (VectorScan 0 - 3).

Still shot on Preset (Freezes camera picture when travelling to a Preset).

Auto Pivot.

Built in dome menu for programming and setup.

4 alarm inputs with the ability to recall a Preset (Preshot), Patrol (Vectorscan) or PTZ Tour.

Accessing the dome menu

See Figure 1 for the Domes Menu Screen.

In order to access the domes Menu using the DS/DSL press the <* Command> button. A key

assistance box appears which says which keys are used to navigate the following dome menu,

press <Menu> to continue.

* Is displayed next to the time and date (on screen) to indicate that the keyboard is controlling the

dome menu.

To navigate around the domes menu use the DS/DSL keyboards joystick to move the cursor

around.

Press the <Enter> key to select a menu item/entry (also is IRIS OPEN key, within the menu).

Press the <* Command> key to exit a menu item/page (also is IRIS CLOSE key, within the

menu).

To exit out of the Domes menu goto the Domes first page then Press the <* Command> button.

The * will still appear at the bottom of the DS/DSL main monitor. Press and hold down the

<* Command> button to switch dome menu control off (* disappears).

Autopan & Patrol button functions

Pressing the <Autopan> button runs PTZ Tour 1.

Pressing the <Patrol> button runs Vectorscan 0.

1 2 3 4 5 6 7 8 ... 28 29

Sin comentarios

BBV BBV RX100 Guía de instalación Pagina 3