BBV BBV RX100 Guía de instalación Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 29
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
Domes 23 April 2002 I.James
Version 1.3 Page 14 of 29 E & OE
Panasonic WV-CS850 / WV-CS854
This has its own Dome menu that can be accessed by the DS with Application software 2.0 (015)
or above.
Dome features via DS/DSL:
Variable P/T/Z
Full menu operation.
64 presets.
Home position (uses one preset)
1/4-type Super Dynamic II CCD
480 line colour imaging
Automatic / Manual Iris
Electronic Shutter
360° endless panning range
RS485 Control
Patrol & Autopan
*See the Panasonic Data Sheet for more details*
Dome Connection
Connection from the Digital Sprite is from the Serial 9 way D- type Female to the Panasonic
RS485 Data Port (RJ11 Connector).
Digital Sprite - 9 Way D-Type
Female
Panasonic RS485 Data Port - 6 way MMJ
1 Data A + Green R (A)
9 Data B -
Data
Reception
Yellow R (B)
Data
Transmission
GND
Not Used
Dome Setup*
Protocol Selection
Panasonic's conventional.
RS485 Setting
Full Duplex (4 line).
Parameter Selection
19200 Baud Rate, 8 Data Bit, Parity Check None, Stop Bit 1.
Unit Number
1 to 16. Must be relative to Camera Number on Digital Sprite. *
* Please refer to the Panasonic Documentation on exact switch settings.
Accessing the dome menu
In order to access the domes Menu using the DS press the <* Command> button. A key
assistance box appears which says which keys are used to navigate the following dome menu,
press <Menu> to continue.
* Is displayed next to the time and date (on screen) to indicate that the keyboard is controlling the
dome menu.
To navigate around the domes menu use the DS keyboards joystick (á, â) to move the cursor
from Line to Line.
Move the Joystick (ß, à) to change the value.
Press the <Enter> key to select a menu item. Panasonic's CAM (SET) key.
Press the <* Command> key to exit a menu item/page.
To exit out of the Domes menu goto the Domes first page then Press and hold down the
<* Command> button to switch dome menu control off (* disappears).
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 28 29

Comentarios a estos manuales

Sin comentarios