BBV BBV RX100 Guía de instalación descargar pdf (Pagina 10)

Domes 23 April 2002 I.James

Version 1.3 Page 10 of 29 E & OE

Using a TK-C675BE(BU)

Using the later model this has a in built dome menus.

Accessing the dome menu

In order to access the domes Menu using the DS/DSL press the <* Command> button. A key

assistance box appears which says which keys are used to navigate the following dome menu,

press <Menu> to continue.

* Is displayed next to the time and date (on screen) to indicate that the keyboard is controlling the

dome menu.

To navigate around the dome menu use the DS/DSL keyboards joystick to move the cursor

around.

Press the <Enter> key to select a menu item.

Press the <* Command> key to exit a menu item/page.

To exit out of the Domes menu goto the Domes first page then Press and hold down the

<* Command> button to switch dome menu control off (* disappears).

When the first page of the domes menu is on screen each time you press the <* Command>

button the domes menu display will toggle on or off. Make sure before you hold down the

<* Command> Button to exit out of the menu that the domes menu is on screen.

If you don't, when you exit, the dome menu will reappear on screen but you will have exited out of

dome menu control..

Autopan & Patrol button functions

Pressing the <Autopan> button runs Autopan function as defined in the JVC Dome menu.

Pressing the <Patrol> runs Preset Sequence as defined in the JVC Dome Menu.

Presets

Recall Presets by pressing the <Preset> button. Once a box appears on screen that displays:

Goto Preset. Enter Preset number.

Type in the Preset number by using cameras 1 - 10. Camera 10 being 0.

Save Presets by pressing and holding the <Preset> button. Once a box appears on screen that

displays:

Save Preset. Enter Preset number.

Type in the Preset number by using cameras 1 - 10. Camera 10 being 0.

Cancel Presets by double pressing the <Preset> button. Once a box appears on screen that

displays:

Clear Preset. Enter Preset number.

Type in the Preset number by using cameras 1 - 10. Camera 10 being 0.

JVC Commands obtained directly by using the Preset command.

Recall Preset by pressing the goto <Preset> button. Once a box appears on screen that displays

Goto Preset. Enter Preset number.

Type in the Preset number by using cameras 1 - 10. Camera 10 being 0.

Preset Number Function

66 Increase Zoom Speed, cycles through speeds 0, 1, 2, 3.

67 Increase Focus Speed, cycles through speeds 0, 1, 2, 3.

JVC Dome Menu

SETUP

> POSITION SETUP . .

CAMERA . .

CONTROL UNIT . .

> is the item cursor.

. . Submenu to be followed.

See the JVC documentation for further menu details.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 28 29

Comentarios a estos manuales

Sin comentarios

BBV BBV RX100 Guía de instalación Pagina 10

Comentarios a estos manuales