BBV BBV RX100 Guía de instalación descargar pdf (Pagina 20)

Domes 23 April 2002 I.James

Version 1.3 Page 20 of 29 E & OE

Assigning keys to operate relay outputs (CNT-CLS 1-2)

It is possible to assign the <Wash>, <Wipe> or <Lamps> keys to operate different Relay outputs

on the Alarm Output connector.

Default Settings.

DM Key Panasonic function

<Lamps> , latching ON/OFF Not assigned

<Wash>, momentary close Close Aux 1 output

<Wiper>, latching ON/OFF Close Aux 2 output

Enter the Domes menu press the <* Command> button. A key assistance box appears which

says which keys are used to navigate the following dome menu, press <Menu> to continue.

To assign a keyboard button to a Relay output press the <CAM 1> key then press the key you

want to assign to Aux. 1 output. E.g. Press <CAM 1> then <Lamps> . This will assign the

<Lamps> button to operate the Panasonic's Relay Output 1.

Repeat the same process as above but use the <CAM 2> to assign the key to Panasonic Relay

Output 2.

Once the keys have been assigned exit the dome menu by holding down the <* command>

button.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

Sin comentarios

BBV BBV RX100 Guía de instalación Pagina 20