BBV BBV RX100 Guía de instalación descargar pdf (Pagina 11)

Domes 23 April 2002 I.James

Version 1.3 Page 11 of 29 E & OE

Dennard 2050 Dome Direct by RS485

This has its own Dome menu that can be accessed by the DS/DSL.

Dome features via DS/DSL:

Variable speed Pan/Tilt.

Zoom/Focus, Autofocus.

18 x 1 zoom lens, 4.1mm to 73.8mm zoom; F1.4 to F3.0.

Autofocus with manual override.

768 horizontal x 494 vertical, pixels. More than 470 TVL..

0.05° to 300° / second max (both Pan and Tilt).

180° Auto Flip. At 90° tilt down.

Up to 90 Preset positions with programmable titles. 90 (00 - 89)…?? (additional presets can be

programmed using dome's menu)

32 programmable sectors (pan only).

Accessing the dome menu

In order to access the domes Menu using the DS/DSL press the <* Command> button. A key

assistance box appears which says which keys are used to navigate the following dome menu,

press <Menu> to continue.

* Is displayed next to the time and date (on screen) to indicate that the keyboard is controlling the

dome menu.

To navigate around the domes menu use the DS/DSL keyboards joystick to move the cursor

around.

Press the <Enter> key to select a menu item.

Press the <* Command> key to exit a menu item/page.

To exit out of the Domes menu goto the Domes first page then Press and hold down the

<* Command> button to switch dome menu control off (* disappears).

Autopan & Patrol button functions

Pressing the <Autopan> button runs Queue 1.

Pressing the <Patrol> button runs Sequence 1.

Presets

Recall Presets by pressing the <Preset> button. Once a box appears on screen that displays:

Goto Preset. Enter Preset number.

Type in the Preset number by using cameras 1 - 10. Camera 10 being 0.

Save Presets by pressing and holding the <Preset> button. Once a box appears on screen that

displays:

Save Preset. Enter Preset number.

Type in the Preset number by using cameras 1 - 10. Camera 10 being 0.

Note: When saving a Preset on the Dennard it is possible for the Naming Preset screen to

appear (Option within the Dennard Menu, Default is on).

Use the DS/DSL keyboards joystick to move the cursor around.

To select a entry use the <Enter> key.

Once you have finished naming the Preset move the cursor to ACCEPT, EDIT or CANCEL at the

bottom of the screen then use the <Enter> key.

Cancel Presets by double pressing the <Preset> button. Once a box appears on screen that

displays:

Clear Preset. Enter Preset number.

Type in the Preset number by using cameras 1 - 10. Camera 10 being 0.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

Comentarios a estos manuales

Sin comentarios

BBV BBV RX100 Guía de instalación Pagina 11

Comentarios a estos manuales